[nnichols]

The clicking of the solid orange button in the Blynk app does successfully turn it hollow, and in turns fixes the issue with the relay being stuck closed. I checked the app, and it is in fact set to “push”. I normally do not use the Blynk app. My family either uses standard RF remotes or the iOS OpenGarage app on iPhones.

[nnichols]

I was actually getting ready to start a thread about this same thing.

Occasionally the garage door will be opened via the standard RF remote. We’ll try the push button in the garage, which is just a switch using the same terminals as the opengarage unit. The physical button will not work. I then open the iOS Blynk app, and I’ll find the BUTTON widget solid orange and in the ON state. I then click the button and the issue is resolved. The physical push button will then work again.

It appears that the relay is staying closed, but I’m not sure how it even got into that state in the first place.

Running firmware 1.06.

Attachments:

You must be logged in to view attached files.

[Author]

Posts