USB power needed? | OpenGarage

Log In Register

This topic has 1 reply, 2 voices, and was last updated 4 years, 12 months ago by Ray.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
April 27, 2019 at 6:34 pm #1585

Coleman
Participant

How much power does the USB brick need to provide for OpenGarage to work? Is 500mA good enough?
Thank you

April 28, 2019 at 10:19 am #1589

Ray
Keymaster

500mA should be ok, but I would recommend 1amp. Most USB adapters these days are rated at least 1amp, so should be easy to find.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.