OpenGarage Forums OpenGarage Firmware Failed 1.0.7 OTA update

This topic contains 7 replies, has 4 voices, and was last updated by  Geert Vercamer 1 year, 8 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #919

    identd
    Participant

    I have the clear box with the brown backplate.
    I attempted the 1.0.7 OTA update, and this failed.
    I then flashed the device per the instructions, which had me flash nodemcu.bin and then og_1.0.7.bin, both of which were successful.
    After this, I unplugged the device from power, and plugged it back in, and I still have a solid Yellow light.
    Any idea how I can recover this device?

    #920

    identd
    Participant

    Update:
    I flashed the 1.0.1 firmware after the nodemcu.bin, and that seems to take, so I then tried the 1.0.7 again, and it re broke.
    I then did the og_1.0.6-LawrenceJeff.bin version, and that seemed to work. Does 1.0.7 change something that previous versions did not?

    #926

    Ray
    Keymaster

    I have prepared a zip file that contains necessary tools to reflash the firmware through USB. Please download it here:
    http://raysfiles.com/og/ogflash.zip
    take a look at the README.txt and give it a try to see if it works.

    #932

    Geert Vercamer
    Participant

    same here, no luck. Flashed nodemcu.bin first, then I’ve tried both og_1.0.7.bin and og_1.0.7_median.bin
    After flashing and reconnecting to power, it just the solid green/yellow led, no AP. Not even after pushing the button for at least 5″…

    What else can I do?

    Thanks.

    #942

    Ray
    Keymaster

    I suspect this has to do with the way the new firmware is compiled (some compilation flags have changed since the previous version). I’ve reversed those flag changes and updated the reflash zip file:
    http://raysfiles.com/og/ogflash.zip
    it’s now named og_1.0.8.bin. Give it a try and see if it works. If not, please submit a support ticket so we can arrange to have it returned to us in order to check why the new firmware isn’t working for your particular unit.

    #944

    jeff5
    Participant

    Ray, I was having the exact same problems that Geert describes. Flashing the new 1.0.8 fixed these issues and I was able to actually flash to the new version.

    #952

    Ray
    Keymaster

    OK, thanks for letting me know. It does seem to have to do with the compilation flags then.

    #961

    Geert Vercamer
    Participant

    A bit late…, but I agree with jeff5.
    I had the Jeff Lawrence version running and updated over the air to 1.0.8. No problems at all, rebooted OK, working fine.

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.

OpenGarage Forums OpenGarage Firmware Failed 1.0.7 OTA update