OpenGarage Forums OpenGarage Firmware Door opens on its own Reply To: Door opens on its own



Oops didn’t see your answer. No I am not using MQTT but maybe this is my setup that is causing the issue.
My sensor is pointing towards the garage door and it read the distance to the door.
If it opens, the distance is tends to be very big, if it is close it is roughly 300cm.

I have the auto-close enabled and it might be the culprit somehow.
Maybe the device makes a bad reading thinking the door is open and after the 15 minutes period, it tries to “close” it but instead, it opens it.
Would that be possible?