Log In Register

OpenGarage › Forums › OpenGarage Firmware › [Resolved] Downgrade from 1.1.0 to 1.0.4 by mistake

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • March 15, 2019 at 4:24 pm #1488

    006fazer
    Participant

    Hi,

    By mistake i downgrade my OG from firmware 1.1.0 to 1.0.4. OG reboot and connect to wifi. But no way to update it to 1.1.0. i test with all release version from 1.0.1. No way to connect to my computer with USB cable. Push to the button when connecting to USB port, blue led blink one time and shutdown. The computer don’t detect serial port.

    Is there a way to connect a USB/TTL dongle to the motherboard to reflash it ?

    OG still connect to Wifi. I already test with a factory and wifi reset.

    Thanks
    Eric

    • This topic was modified 5 years, 1 month ago by 006fazer.
    March 16, 2019 at 1:03 pm #1490

    Ray
    Keymaster

    Depending on what version of OG you have, it may or may not have on-board USB-serial chip (CH340G). You can certainly use an external USB serial adapter to flash the firmware.

    Before you do that, I am not entirely sure why OTA update doesn’t work: sure you downgraded to 1.0.4, but all firmwares support OTA update. Did you get any specific error message or something?

    March 16, 2019 at 1:46 pm #1491

    006fazer
    Participant

    Hi

    No error when downgrade and no error when upgrade with the latest version but after reboot it’s always the 1.0.4.

    Hi can a see which chip my OG have ?

    Thx
    Eric

    • This reply was modified 5 years, 1 month ago by 006fazer.
    Attachments:
    You must be logged in to view attached files.
    March 17, 2019 at 9:10 am #1494

    Ray
    Keymaster

    Yes, your image shows that the board does NOT have a built-in USB-serial chip. If you have a USB-serial converter, you can flash the firmware yourself. Otherwise, send a support ticket and arrange for it to be shipped back to us, so we can flash the firmware for you.

    March 17, 2019 at 9:21 am #1495

    006fazer
    Participant

    Hi

    Could you tell me how can I can I connect my usbttl port to the OG ?

    😉

    March 19, 2019 at 10:17 am #1496

    006fazer
    Participant

    Hi

    Any news ?😉 I open a support request.

    Best regards
    Eric

    March 25, 2019 at 4:45 am #1504

    006fazer
    Participant

    Hi Ray,

    Can i connect directly to this connector ?

    UBL-TTL TX to the OG RX
    UBL-TTL RX to the OG TX
    and +5V and ground

    Thanks
    Eric

    • This reply was modified 5 years, 1 month ago by 006fazer.
    Attachments:
    You must be logged in to view attached files.
    March 25, 2019 at 3:22 pm #1508

    006fazer
    Participant

    Problem resolved by flashing OG with a little usb-ttl dongle 😉

    March 27, 2019 at 11:43 pm #1516

    Ray
    Keymaster

    Sorry for being so late on responding — I was out of the country last week for an emergency trip. You are right that it basically just requires 4 wires: 5V, GND, TX, RX. Glad to hear that you figured it out on your own.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.

OpenGarage › Forums › OpenGarage Firmware › [Resolved] Downgrade from 1.1.0 to 1.0.4 by mistake